Component Services
Cable Brake Service
Inner brake cables replaced, outers lubricated. Pads checked and aligned. Cable tensions adjusted to operate correctly inner cables trimmed and a cable ends fitted. Outers can be replaced for an extra £5. As brakes are for safety critical component, both are done.
Hydraulic Brake Service
Remove brake lever, and callipers from bike. Clean Callipers and levers, remove old oil replace with new and bleed the system. Inspect pads and replace if required (purchased separately). Refit to bike and adjust.
Single Gear Service
Clean and lubricate derailleur, replace inner gear cable (if required) set limit screws and adjust indexing for gears to run smoothly. Trim cable and fit cable ends. Cable outers can be replaced for an extra £2.50.
Gear Service
As Per a Single gear service , Both Front and rear are done. Outer cables can be done for an extra £5
Drive System Service
Remove the chain, cassette, rear mech, crankset and front mech. Clean, lubricate and refit. Replace cables if required and set up limit screws and adjust indexing for a clean crisp gear change.
Wheel Hub Adjust
Remove any play from the wheel bearings.
Wheel Hub Service
If adjusting does does remove the play then a full strip down, clean re-grease and refit is required. Bearings in each may require to be replaced (purchased separately). If other components within the hubs are damaged beyond repair then complete assemblies may require to be replaced (purchased separately).
Freehub Replacement
Replacing the freehub requires stripping down the rear wheel axle and removing the free hub. The axle and bearings will be cleaned and greased on reassembly. Freehub to be purchased separately.
Headset Adjust
Remove any play from the Headset bearings.
Headset Service
If adjusting does remove the play. Then a full strip down, clean re-grease and refit is required. Bearings may require replacing (purchased separately). If other components within the headset are damaged beyond repair then complete assemblies will need to be replaced (purchased separately).
Bottom Bracket Adjust
Most bikes don’t have an adjustable BB but if your bike does this will remove any play from BB
Bottom Bracket Service
If adjusting does does remove the play or you have sealed bearings then a full strip down, clean re-grease and refit is required. Bearings in each may require to be replaced (purchased separately). If other components within the hubs are damaged beyond repair then complete assemblies may require to be replaced (purchased separately).
Wheel Trued & Dished
If the wheel has a slight buckle, wobble or is not dished properly then this will straighten it. if it looks like a Pringle crisp then this might not fix it. A new wheel might be the only option we can help with this.
Spoke Replacement
Replace any Broken / Damaged spokes, true and dish. If more than 5 spokes are damaged, a full wheel rebuild may be required, price will need to be evaluated. A new wheel may be a more economical option.
Tyre or Innertube Replaced
fit a new tyre or inner tube (purchased separately)
Tubeless Conversion
Convert your (Tubeless ready) wheels to a Tubeless setup. Price includes sealant, rim tape and presta valve. Tubeless tyres required (may need to be purchased separately).
Fitting Various Components
Fitting of Components ie Chain, Cassette, Freewheel, Mechs, Gear hangers, Saddle, Pedals etc…..
please message for a price.
Fitting Various Accessories
Fitting of Accessories ie Lights, Mudguards, Bike Racks etc…..
please message for a price.